Jeep XJ/MJ/JT/ZJ/JK/JKU/JL/JLU/LJ/TJCE-9110P-10 - 2 1/2 in. Johnny Joint Rod End (Weld-On, 2.440 in. x 0.468 in.)

Johnny Joints, RockJock

CE-9110P-10 - 2 1/2 in. Johnny Joint Rod End (Weld-On, 2.440 in. x 0.468 in.)

CE-9110P-10 - 2 1/2 in. Johnny Joint Rod End (Weld-On, 2.440 in. x 0.468 in.)

$56.00

-

[core4x4_product_fitment]
Share on facebook
Facebook
Share on email
Email
RockJock’s weld-on Johnny Joints® for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint® rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180″ wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2″ o.d. and features a 2.440″ mounting width and a .468″ thru bolt hole.

Detail