Jeep XJ/MJ/JT/ZJ/JK/JKU/JL/JLU/LJ/TJCE-9116N-21 - Johnny Joint Forged Rod End (1.615 in. x 0.718 in., 7/8 in.-14 RH Thread)

Johnny Joints, RockJock

CE-9116N-21 - Johnny Joint Forged Rod End (1.615 in. x 0.718 in., 7/8 in.-14 RH Thread)

CE-9116N-21 - Johnny Joint Forged Rod End (1.615 in. x 0.718 in., 7/8 in.-14 RH Thread)

$60.00

-

[core4x4_product_fitment]
Share on facebook
Facebook
Share on email
Email
RockJock’s narrow forged Johnny Joints® for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint® rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2″ diameter, fitted with a zerk fitting for greasing, 2 1/4″ of 7/8″-14 right hand threads on the shank, and a 1.615″ mounting width ball with a .718″ thru bolt hole. Finished in gold zinc plating.

Detail